Cleanroom-ready industrial PCs and touch terminals for wafer fabs, SMT lines, litho / etch / test & packaging equipment, and PCBA inspection. Class 100/1000 cleanliness, ESD protection, particle control, and high-precision multi-protocol buses — semiconductor manufacturing demands electrical stability, low heat, and zero contamination far beyond a typical industrial floor.
SEMICONDUCTOR
Fab contamination control, real-time SMT placement, and handling static-sensitive devices — three challenges that leave ordinary industrial PCs far behind.
Class 100 / Class 1000 cleanrooms forbid particle shedding. An ordinary PC's cooling fan, plastic enclosure, and flaking coatings are all cleanliness killers. You need fanless cooling, a stainless-steel / anodized body, and a rounded design with no dirt-trapping gaps.
Electrostatic-sensitive devices (ESD-S) can be damaged by as little as 100V of static. The enclosure must be reliably grounded with surface resistance in the 10⁶–10⁹ Ω range. An ordinary panel PC's plastic bezel cannot meet this.
High-speed SMT placers run at 0.04s per component, and litho / etch tools require µm-level precision. Clock stability, PCI/PCIe bus timing, and interrupt-response jitter all directly affect yield.
From the fab front end → packaging & test → SMT placement → AOI / AXI inspection, every station places distinct demands on the industrial PC.
Hygienic panel-mount consoles for front-end process equipment (litho / etch / CVD / PVD)
Central controller for high-speed placers / inspection machines + vision-camera connectivity
PCBA automated optical inspection / X-ray inspection / semiconductor package appearance inspection
Test probe stations / burn-in chambers / handler HMIs
Core models selected for this industry — covering control, display, communication, and ruggedization across the full stack.
Cleanroom Panel-Mount
304/316 stainless front panel, IP69K, for panel-mount console installation. Zero particle shedding, chemical-resistant cleaning, SEMI S2 compatible — built for fab and packaging-and-test cleanrooms.
View S Series, 24 models →
AI Inspection
NVIDIA Jetson Orin edge AI IPC, up to 275 TOPS. Purpose-built for AOI / AXI vision inspection, defect classification, and SPC data pre-processing.
View AI IPC series →
SMT Controller
FlexCore™ three-board modular motherboard, PCIe ×16 + ×4 expansion, supporting motion-control and I/O cards as needed. The first choice for SMT controllers, placers, and inspection machines.
View modular series →CleanOps™ + ComputeOps™ equipment is designed around semiconductor-manufacturing standards.
Environmental, health & safety standard for semiconductor equipment — equipment-level EHS evaluation, with CESIPC industrial PCs designed to meet its key points.
Reliability, availability & maintainability (RAM) standard for semiconductor equipment — long-life design and serviceable interface layout.
ISO 14644 cleanroom classes — fanless cooling, stainless body, and non-shedding coatings.
ANSI/ESD S20.20 electrostatic control program — grounding, surface resistance, and ESD-area requirements.
Cleanroom and controlled-environment standard — equipment designed not to release particulate contaminants.
Hazardous-substance restrictions for electronic and electrical equipment — CESIPC systems comply with RoHS 2.0 / REACH.
Share the context (wafer / packaging-and-test / SMT / PCBA / AOI), cleanliness class (Class 100/1000), equipment models, mounting method, and order volume, and our engineers will reply within 24 hours with a complete solution and quotation.
